HYDRAULIC OIL JET RESISTANT - HIGH CUT
13-4 Puncture Hydraulic
Tested against hydraulic jets from a pinhole of 0,3mm, standard clean hydraulic oil at room temp,
250 bar pressure, 1 second exposure time, pinhole direct contact to glove and a contact force of ~3N.
The penetrating power of a hydraulic jet will vary considerably depending on hydraulic oil properties,
distance from pinhole, diameter of hole, working pressure and exposure time.
Main materials: HPPE, Polyester, Nitrile composite
Category: Puncture & Needle
SKU: 13-4P HYDRO
Standard:EN388, EN388 CUT,
ANSI CUT Cut resistant :A5, E
Attributes: Oily environment, Wet environment
Coating:Nitrile 2
Available Sizes 7-12
耐液壓油噴射 - 切割防護手套
針對 0.3 毫米針孔的液壓噴射進行測試，
標準清潔液壓油，室溫、250 巴壓力、1 秒鐘暴露時間、孔直接接觸手套以及 ~3N 的接觸力。
液壓射流的穿透力會因液壓油的特性而有很大不同、針孔距離、針孔直徑、工作壓力和暴露時間的不同，液壓射流的穿透力也會有很大差異。
主要材料： 高密度聚乙烯、聚酯、丁腈橡膠複合材料
Eureka Cataloghttps://www.tranemotaiwan.com/_files/ugd/ca4ea1_af706d7795d54163905bc96e64108244.pdf